Our Mustang MD-800 Chassis Dynamometer has two 24 inch rollers that will allow us to test up to 2,250 Horsepower to the wheels and has an Eddy Current Brake that allows steady state tuning up to 900 Horsepower. We use the Mustang Holeshot software to datalog parameters on each dyno run and print colored graphs out for the customer.  The Holeshot software allows us to run multiple different styles of tests.
  • Power Curve Test
    • Power tests from RPM to RPM or MPH to MPH
  • Vehicle Sim Test
    • Simulate a certain load at a specific RPM or MPH
  • Timing Test
    • Run a test for a certain period of time at a specified load
  • Constant Speed Test
    • Dyno can hold vehicle at certain speed to test different parameters at that speed
  • Sprint Test
    • Run 1/8 mile & 1/4 passes from a stop 
Our Drag Sim package with Christmas Tree allows us to use a professional style tree that works as a full tree or pro tree.  When you start the test the staging bulbs come on just like if you were staged and ready to go on a drag strip.  There is a separate screen that has a drag strip that you are on either in car view or out of car view whichever you would rather have.  The lights come down and you either let go of a transbrake button or stomp on the gas pedal to start the run and watch yourself go down the track! The dyno will calculate your reaction time, 60 foot time, elapsed time, and MPH of run.  It also will give you your Horsepower & Torque numbers on the run.

Chassis Dyno Sensors
  • Air/Fuel Sensors
  • RPM Sensor
  • Fuel Pressure Sensor
  • Intake Air Temp Sensor
  • Intake Airflow Sensor
  • Blowby Sensor
  • Vacuum/Boost Sensor
  • 25 PSI & 100 PSI Pressure Sensors
  • Plex Knock Sensor
  • EGT Sensors

EFI Tuning
We offer EFI tuning in house.  Whether it's using HP Tuners to tune a stock computer, tuning a standalone system that has already been installed, or building a complete standalone system from scratch we have the tools and knowledge for the job.  Some of the EFI systems we have had experience with include:
  • Holley
  • Fitech
  • FAST
  • Megasquirt
  • MSD
  • HP Tuners software

Chassis Dyno Session Scheduling
If you have a vehicle that you would like to have dyno tuning done on make sure to either give us a call at 701-685-2412 or contact us through the contact page on the website so that we can schedule you in! To schedule a dyno session it requires:
  1. $125 Non-Refundable Deposit
  2. Read over the Pre-Dyno Checklist to make sure your vehicle is ready for a dyno session
  3. Fill out the Vehicle Information Form (as much information on there as possible)
  4. Fill out the Chassis Dyno Liability Form
  5. Either email us a copy of the Vehicle Information Form & Chassis Dyno Liability Form or bring them along to your scheduled dyno session